Not many players like to play as Fury in PvP because this spec isn’t exactly the easiest to play while fighting other players. You have to continuously change stances, and the fact that you can wield two 2-handed weapons doesn’t help that much. However, if you want to be different, I’m going to review in this post, a WoW warrior macro that will help you out as Fury, in PvP.

On the Arms spec, you get the Juggernaut talent which will allow you to use Charge in any stance, but now it will share the cooldown with Intercept. As a Protection warrior, you can basically use Charge, Intercept and Intervene in any stance, and in combat, as long as they’re not on cooldown, due to the Warbringer talent. But on Fury, you’ll have to quickly switch stances to use Charge or Intercept.

So, it’s best to combine Charge and Intercept in the following WoW warrior macro:

#show
/cast [stance:1] Charge; [stance:3] Intercept

So, if you’re in Battle Stance, by pushing this WoW warrior macro you will cast Charge (but make sure you’re out of combat), and if you’re in Berserker Stance you will cast Intercept. However, to be more proficient at using this WoW warrior macro, you’ll have to change stances quickly. So, it’s best to also use this stance-swap macro:

/cast [stance:1] Berserker Stance; [stance:3] Battle Stance

You’re going to need to bind these WoW macros for warrior on keys where you can quickly reach them because you’ll have to use them a lot.

I hope the Charge-Intercept WoW warrior macro will help you out as Fury in PvP. Also, here’s another useful post about WoW Warrior Macros.

May thine enemies perrish!

>>> Discover Each WoW Warrior Macro Used By The Pros!

Before I type in this WoW death knight macro, I want to make one thing clear. In case you play arena, no matter what you do, this talent – Lichborne – is a must. Not only that you will have the possibility of healing yourself nicely while under the influence of this spell, you will also be immune to Fear, Charm and Sleep effects.

The healing WoW death knight macro looks something like this:

#show
/cast Lichborne
/target YOUR NAME
/castsequence Death Coil, Death Coil

While under the influence of Lichborne, you will become undead, which gives you the possibility of healing yourself with Death Coil. So, if you hit this WoW death knight macro when your Runic Power bar is full, you’ll be able to cast 2 Death Coils on yourself, healing you pretty nicely.

Also, there’s another WoW death knight macro that you can use for healing. This one is a bit more simple, and looks like this:

/castsequence Raise Dead, Death Pact

Doesn’t help that much, because you can always hit one button, then the other, but in case you want to use your zombie companion just to heal yourself, this WoW death knight macro will save one slot in your quick bars. However, make sure you have at least 40 Runic Power when you hit this WoW death knight macro because otherwise it will only summon your undead, without healing you.

>>> Check out another useful post about WoW Death Knight Macros!

Although you won’t have too many damaging cooldowns as a Blood DK, here’s a WoW DK macro that will endow you with a very nice DPS burst.

This WoW DK macro should look something like this:

/use 13
/castsequence Dancing Rune Weapon, Outbreak

This sequence will pop the DPS trinket in your slot 13 and also pop Dancing Rune Weapon, followed by Outbreak which will give your target 2 sets of diseases.

It would be great to pop this WoW DK macro when you have 2x Unholy Rune and 2x Frost Rune up, to be able to use 2 Death Strikes in a row for high damage and also self heals. Also, make sure you’re in Frost Presence for more damage.

In case you play an orc or a troll, you can add the racial ability – Blood Fury or Berserking – to enhance this WoW DK macro even more.

I hope this post helps and this WoW DK macro works for you. However, if you want to optimize your quick bars at maximum and use a balanced keybinding, I recommend a WoW macros and keybindings addon. It loads up into your UI an elite keybinding and macros which will unlock your Death Knight’s maximum potential.

It’s a sequence macro that combines several of your spells that must remain on the target at all time, if possible. So, without wasting too much of your time, this WoW priest macro looks something like this:

#show
/castsequence reset=4 Vampiric Touch, Shadow Word: Pain, Vampiric Embrace

Once the target has these effects on it, you can continue with your castable spells like Mind Blast, Mind Flay etc. If you want to start a combat session with more damage, you can add “/use 13″ or “/use 14″, or both, in case you have 2 trinkets that don’t share the same cooldown.

Also, if you want to use this WoW priest macro in PvP, you can make a little modification to it, in case you want to use it on a melee target that will attack you.

#show
/castsequence [nomod] reset=4 Vampiric Touch, Shadow Word: Pain, Vampiric Embrace
/castsequence [mod:shift] reset=4 Vampiric Touch, Shadow Word: Pain, Vampiric Embrace, Psychic Horror

The second sequence also has Psychic Horror added, so if you push this WoW priest macro while you also press shift, you’ll be able to fear your opponent on the 4th hit.

The shift sequence of this WoW priest macro is useful if you’re fighting a melee class. By the time they reach you, you had already cast the first 3 spells and it’s time to fear them.

Hope this WoW priest macro helps. Also, here’s another useful post on WoW Priest Macros. May your enemies taste your shadow, whether they’re players or NPC’s!

Discover How To Keybind Each WoW Priest Macro Correctly and Play Your Priest Like a Pro!

If you have no idea what macros and keybindings are, I will help you make a better idea about this aspect of World of Warcraft in the following paragraphs.

What Are WoW Macros?

A macro is a script that you can create yourself by using the Macros options in the game menu. To write one, first you have to select an icon, and then give it a name.

The next step is to write the abilities and the actions that you want to combine in that macro. Once the macro is complete, just drag it into one of your quickbars.

What Are WoW Macros Good For?

The purpose of using a macro is to simplify the gameplay of your character. In a WoW macro, you can combine various abilities to use them all at once, or use them alternatively just by pressing that macro multiple times.

A macro will not only that will simplify the gameplay of your character, it will also, allow you to save space in your quickbars.

Of course, there are advanced, multi-purpose macros, and there are the ones that most players use, easy to write and work with.

What Are WoW Keybindings?

Your WoW keybinding is the map of your abilities and actions corresponding to certain keys of your keyboard. Each key invokes one command to your character, using a certain ability that you slotted there.

Most players start up with the standard WoW keybinding when they roll a new character, and modify it as they level up, adding new abilities as they learn them from their class trainer.

What’s The Purpose of WoW Keybindings?

To be able to play your character at maximum using every ability at the right time, you must optimize your keybinding properly. Just adding abilities on your quick bar won’t cut it.

A well-made WoW keybinding has to have at least a few macros and must contain as many abilities as possible, keeping the most important ones in the optimal reach of your fingers. If you manage to create a keybinding this way you will have a superior gameplay in arena or in any raid instance.

Do We Really Need to Use Macros and Keybindings?

To be able to play World of Warcraft like an elite WoW player, unlock the maximum effectiveness of your character and be competitive in PvP and PvE, a WoW keybinding containing the right macros is vital. Without it, you’ll never pass the average status.

There are thousands of WoW macros and keybindings that you can use to play a character. However, using the wrong macros and totally inaccessible keybindings won’t help at all. In fact it will set you back.

It is imperative to use the best WoW macros and keybindings and this is the actual purpose of this website: to inform you about the best macros and the most optimized keybindings for World of Warcraft.

Since you won’t be having any great healing spells the best one to use is the Word of Glory. But due to the fact that you’ll be fighting the other players to slow them down, you’ll have to use a focus macro for the flag carrier. Needless to say, you’ll have to keep the one carrying the flag under your focus. If you don’t like to type in /focus or open the menu of that particular player, you can also make a button macro for the focus command.

Now, the WoW pally macro that I usually use to help the flag carrier looks something like this:

/castsequence [target=focus] reset=25 Hand of Freedom, Word of Glory

Every 25 seconds, when Hand of Freedom refreshes, by pushing this WoW pally macro twice, you will cast Hand of Freedom on the flag carrier, preventing them from being slowed down or rooted, and also cast a Word of Glory spell on them which by that time should be up and at 3 charges of Holy Power.

This WoW pally macro works nicely when you play BGs in a duo, with a friend.

Anyway, in case you want more than just a macro for paladins, like a tool that will allow you to unlock your pally’s maximum effectiveness, I strongly recommend you a WoW macros and keybindings addon. It will allow you to load up instantly, the macros and keybindings of the pros, and it will surely improve your gameplay.

So, how does this WoW paladin macro look like?

Well, it’s very simple to make, just throw in all the major DPS cooldowns. It should look something like this.

 #show
/cast Zealotry
/cast Avenging Wrath
/cast Guardian of Ancient Kings
/use 13

This WoW paladin macro serves you best in a full DPS team, in arena. If all the players in your team agree to use a similar “burn” macro, this is the one you should use. In case you play in a more balanced team, in which players fulfill various roles, it’s best to keep the pally macro at hand, but also have each one of the cooldowns separately bound, in case you need to use them 1 by 1, for a sustained but lower damage boost.

Anyway, this is just one WoW paladin macro, and although it’s called an “I WIN” button, you won’t win all the time when you use it. To win almost every match in arena, it’s best to use a balanced keybinding. For that, I strongly recommend to work with a WoW macros and keybindings addon. You will find an elite one on the first page of this website.

Also, if you want to learn more about paladin macros, check out this post on WoW Paladin Macros.

The basic form of this WoW shaman macro for Elemental spec looks like this:

/use 13
/cast Elemental Mastery
/cast Lightning Bolt

Pretty short and sweet WoW shaman macro, that will shoot a damage improved and instant Lightning Bolt to your target. Of course, the effect of Elemental Mastery and  your damaging trinket on slot 13 will persist for the next 15 seconds and you’ll deal more damage with the other spells.

This WoW shaman macro can be improved though. For example, if you play an orc or troll, you can add Blood Fury or Berserking to it. Also, if you think it’s the case, you can put Bloodlust or Heroism in this macro. However, a cooldown like Bloodlust or Heroism should be kept and used only when most of the players of your team can benefit from its effect.

Anyway, I’m sure this WoW shaman macro will help. But, in case you want more than just a macro, and you would like to try the keybindings and macros of the pro players that play the shaman class, I invite you to check out this WoW macros and keybindings tool.

>>> Learn more about WoW Shaman Macros!

So, sit back and enjoy the sweetness of this WoW warlock macro.

As you may have guessed, it’s a sequence macro combining quite a few spells. It looks something like this:

#show
/castsequence reset=4 Curse of the Elements, Corruption, Bane of Agony, Immolate
/use 13

As you can see, this WoW warlock macro sequence starts by debuffing the target, then applying all the DOTs. You can press it just 3 times if you don’t want to also cast Immolate. Or, in case you want to start the fight by castin Immolate, just move this spell as second, and increase the reset timer to 5 or 6 so the sequence won’t reset before all the spells were cast.

Of course, make sure you have a usable damage trinket on slot 13. And in case you have 2 DPS trinkets that don’t share cooldowns, you can also add “/use 14″ to this WoW warlock macro.

Keybinding this WoW warlock macro somewhere on your main quick bar, you won’t have to bind all the other DOTs there. In case you really want to see them all, keep them on one of the auxiliary bars on the right.

I’m sure this WoW warlock macro will help. Also, in case you want to work with a completely balanced keybinding for warlocks, I strongly recommend you a WoW macros and keybindings addon. You will find an elite one on the home page of this website.

>>> Also, check out another useful article on WoW Warlock Macros.

#show
/castsequence reset=6 Rejuvenation, Wild Growth, Lifebloom, Lifebloom, Lifebloom

This WoW druid macro will save 2 slots in your quick bar, where you can fit your Moonfire, Insect Swarm or Cyclone, which is a spell that you really must use in arena, no matter what spec you play. You can also add Regrowth to this WoW druid macro, but in that case you should increase the reset timer.

I want to make an aspect clear though, about this druid macro. As you can see, it’s a little bit restrictive. It may work nicely in a 2v2 arena match, but in a heroic or raid, in case multiple players in the group get hit, you’ll have to improvise and place at least 1 Rejuventation and/or Regrowth on a few players. In that case, it’s best to use the spells as they are.

So, for raids or heroics, if you want to use this WoW druid macro for healing, it’s best to bind it on a key separate from your main 1-6 line of spells, on X or Z. If the DPS players are skilled and don’t take too much damage, this macro is ideal to heal the main tank.

Anyway, either if you use this WoW druid macro or not, I want to underline that to be a good healer, that alternates DPS and healing spells and attacks, changing forms properly, you need a really balanced keybinding. For that, I strongly recommend this WoW macros and keybindings addon.

>>> Check out another useful article for WoW Druid Macros.